BRICK & STONE
PANELS FAQ
|
How do the panels fit together?
All the
panels have an interlocking ship lap system
on all four sides.
Brick Panels
>
|
Can I replace a panel if gets damaged?
Yes you can.
Contact your installer or Nichiha and it can
be replaced with only removing that one
panel.
Panel Repair
>
|
How do I finish the panel at the
corners?
We have
pre-manufactured corners for all our panel
products as well as you can field miter the
corners yourself.
Mitered
Corners >
|
Can I get the illumination series in any
color I want?
There are
custom color options in the illumination
series. Please contact you local
distributor.
Illumination Series >
|
Do the panels require caulk on the panel
joints?
No. No
caulk/sealant is required because the panels
are 4-sides ship lapped.
Brick Panels
>
|
Is a moisture barrier required behind
the product?
Yes approved
weather resistance barrier that complies
with the local building codes is required.
Construction
Methods >
|
How big of a building can your product
be installed on?
There are no
restrictions on the size of the building
basically, however, some special
installation might be required by the
project. Please consult the technical
department of Nichiha for special
installation.
Construction Methods >
|
What is the maximum height of the
building?
Under 45' no
special instructions needed. Over 45' please
contact Nichiha technical department.
Construction Methods >
|
What is the dimensions of the panels?
Each panel is
18" x 72" nominally.
Brick Panels
>
|
How many square feet does a panel cover?
9 sqft
Brick Panels
>
|
How much does a panel weigh?
36lbs
Brick Panels >
|
|
|